Cart
Subtotal: 0
View Cart
Search
Advanced Search
Car Cleaning Tips

Exterior cleaning

Wash your car regularly

To keep your car’s bodywork in an impeccable condition it has to be washed regularly. As the paintwork is permanently exposed to pollution, bird droppings, tree sap and other harmful elements washing your car regularly prevents the build up of harmful substances that damage paintwork.

How to wash your car effectively

First of all, it is very important to use a special detergent for cars, like the Super Wax Shampoo or the Beauty Shine Shampoo. Dishwashing type products have too much degreasing power, which might damage the paintwork’s protective layers.

dilute super wax shampooadd super wax shampoo
Step 1

Fill a bucket with water and add Super Wax Shampoo or Beauty Shine Shampoo according to the recommended dosage.

Step 2clean doors trunk jambs

Open the doors, the trunk and the hood and clean the jambs of doors, trunk and so on.
Close everything.

Step 3Insect Removerrinse with clean water

Remove dust and dirt everywhere by spraying the car with plenty of clean water.
To remove insects and bird droppings use a product such as Marly Anti-Insects to avoid scratching the paint.

Step 4clean with sponge

Use a clean sponge and begin washing the horizontal parts, such as roof, windshield and trunk. Rinse each part after washing it.

Step 5clean car vertical parts

After the horizontal parts, wash the vertical parts and keep the lower parts for last, as they are also the dirtiest. Finish with the car front, rear and underbody.

Step 6rinse wheelsuse wheel cleaner

Finally, wipe the rims with a suitable product such as Marly Wheel Cleaner. Spray the rims with the product and let it work for 10-15 minutes.
Treat resistant dirt with a brush and clean the entire rim with a sponge. Rinse under a strong jet of water.

Step 7rinse car

Rinse thoroughly the entire car by holding the jet near the body so that water flows and does not produces drop, which will facilitate drying.

Step 8dry with chamois leather

Dry the car immediately with a chamois leather or a clean cotton cloth, starting from the top.

Step 9use bumper & tyre dressing

After drying the exterior off, open the doors, the hood and the trunk and dry the jambs.

Step 10

As a finishing touch use the Marly Bumper & Tyre Dressing to make the bumpers, moldings and tire sidewalls to shine.

Interior cleaning

Step 1clean car interioruse carpet and seat cleaner

Remove the carpets and vacuum clean the interior and the trunk. Shake the carpets to remove excessive dirt and vacuum clean them.

Step 2

Clean seats and carpets with Marly Textile Cleaner. If you have a leather interior clean it with Marly Cockpit Multi Cleaner and apply a leather care product to keep it soft and comfortable.

Step 3

Un-dust the dashboard, starting with the highest spots to avoid the dust would redeposit on cleaned spots.

Step 4

Use the Marly Multi Cockpit Cleaner to clean the dashboard. Spray on. Wipe clean with a soft cloth or absorbing paper.

 Marly Cockpit Cleaner     Wipe clean with absorbing cloth      clean cockpit

Step 5

At last, clean the windows with a special cleaner like the Marly Glass Cleaner. Spray on and wipe clean with a soft cloth, absorbing paper or chamois leather.

 Marly Glass Cleaner     spray on glass and wipe out      wipe glass

Polish, scratches, engine cleaning

Polish

To protect your vehicle against corrosion, UV rays, oxidation and other damage the paintwork should be polished at least twice a year. The surfaces to be polished have to be clean, dry, cold and not exposed to sunlight. Use Marly Polishing Wax, apply the product in circular movements with a soft cloth. Let it dry and buff to a shine with a soft, clean polishing cloth. Treat one surface at a time beginning with the horizontal surfaces followed by the vertical ones. Avoid applying wax on non-painted surfaces like plastics or joints.

apply polishing wax      soft cloth circular movements      shine with clean polishing cloth

Remove Scratches

To remove light scratches (for example, under the door handles) use an anti-scratch polish such as Marly Scratch Remover. Apply Marly Scratch Remover like a normal polishing wax.

scratch case      apply scratch remover      remove scratches result

Engine Cleaning

  1. Protect parts that will be affected by water with plastic (for example, electrical components).
  2. Apply Marly Engine Cleaner abundantly.
  3. Use a brush for stubborn dirt. Allow the product to work for 5 to 10 minutes and then rinse with a strong jet of water.
 engine cleaning step1     engine cleaning step2      engine cleaning step3
Home  |  Additives  |  Car Care  |  Zenox®  |  Pros  |  Wx² Nanotec®  |  Bike Products  |  Store
Copyright 2010-2011 © Marly   |  Digital Marketing Solutions by WSI